To use a CPAP cleaner machine correctly, follow these steps:
- Disconnect the CPAP mask, tubing, and other accessories from the CPAP machine.
- Place the mask, tubing, and other accessories into the cleaning chamber of the CPAP cleaner.
- Add the cleaning solution to the chamber, according to the manufacturer's instructions.
- Close the lid of the CPAP cleaner and turn it on.
- Allow the machine to run for the recommended amount of time, typically between 30 and 45 minutes.
- When the cleaning cycle is complete, remove the mask, tubing, and other accessories from the cleaning chamber and rinse them off with warm water.
- Dry the items thoroughly before reattaching them to the CPAP machine.
It's important to follow the manufacturer's instructions for your specific CPAP cleaner machine to ensure that it is used correctly and effectively. If you have any questions or concerns, consult the user manual or contact the manufacturer.
Clyn CZ001 easy to clean your CPAP equipment:
Step 1: Clean your mask and hose.
1) Plug your hose with the mask attached to CZ001, put the mask inside the CZ001 sanitizing bag, and zip the bag.
2) Turn CZ001 on and wait 30 minutes. The working indicator will turn off when the cleaning cycle is complete, and then turn itself off.
Step 2: Sleep apnea machine cleaning.
3) Take the mask and hose out of the bag.
4) If you have a humidifier, dump out any water.
5) Reconnect the hose to the humidifier (attached to your CPAP machine) or if you do not have a humidifier, reconnect the hose to the machine. Turn on CZ001 and wait 30 minutes.